Operation Manual

5
Measurement
3. PHOTO Mode
Use this mode to obtain exposure settings when taking single images with adjustable
film or digital cameras. Measuring mode choices include Ambient, Cordless Flash and
Cord Flash. When measurements are taken, the meter will indicate the aperture value
required for proper exposure.
Refer to the custom setting to select the PHOTO mode (See page 26).
3-1. Measuring Ambient Light
Press MODE button to select the Ambient
mode. Measurements in this mode are made in
the Shutter Speed Priority mode or EV mode.
3-1-1. Shutter Speed Priority mode
Press the MODE button to select the
Shutter Speed Priority mode.
Hold ISO button and press UP or DOWN
button to select the ISO sensitivity (See
page 11)
Press the UP button or DOWN button to
set the desired shutter speed.
Press the MEASURING button to make
a measurement. Measurements will be
taken continuously and displayed as
aperture values as long as the button
is pressed. Releasing the MEASURING
button will hold and display the last
measurement value.
Use Custom Setting to display shutter speed step increment in full, 1/2 or 1/3
step increment (See page 26).
Shutter speed can be set from 60 sec. to 1/8000 sec.
After the measurement, the aperture value will be automatically adjusted to
maintain proper exposure when changes in shutter speed and/or ISO are made.
If “E.o” (over) or “E.u” (under) appears and blinks, the measurement cannot
be made at the selected settings (See page 23).
•
•
•
•
1)
2)
3)
4)
16
M
O
D
E
MODE button
ISO button
UP button
DOWN button
1/10 step measurement
value (f stop)
Set shutter
speed
Measurement
value (f stop)