Operation Manual

5. Measurement
In mixed flash-ambient measurements, the meter may fail to detect the
light if the flash brightness is 9EV lower than the ambient light. In this case,
make measurements using the “Cord Flash mode” (See page 19).
Sometimes, certain fluorescent lamps and special lighting can be mistaken
for flash, and accidentally measured. In this case, make measurements
using the “Cord Flash mode” (See page 19).
Sudden, bright changes in light intensity, may be mistaken measured as
flash. To avoid this, use "Cord Flash Mode" (See page 19).
l
l
l
The setting of shutter speed is same as “Cord Flash mode” (See page 19).
After measuring, If the ISO is changed, the corresponding measured value (f
stop value) will be displayed.
If “E.o”(over) or “E.u” (under) appears and blinks, the measurement cannot
be made at the selected settings (See page 23).
•
•
•
22