Operation Manual

6
Advanced Functions
1. Calibration compensation function
This meter has been calibrated to Sekonic standards. However, compensation may be
necessary to calibrate the meter to camera specifications or to match the display to
another exposure meter. Calibration compensation can be made in precise 1/10 step
increments in a +/-1.0 EV range.
Set the camera Display mode (HD CINE, CINE or PHOTO) in advance.
Calibration compensation can be set independently in each Display mode. Select
the Display mode in advance in the custom setting function. (see page 26)
•
To enter the calibration compensation mode,
hold the ISO button and press the POWER
button to turn the meter ON .
“CAL” will appear at the upper right of
the LCD. The Display mode will appear
at the lower left of the LCD. The current
compensation amount will appear at the
lower right of display. (Default setting is
“0.0”)
Select the compensation amount by pressing
the UP or DOWN button.
Plus compensation results in the increased exposure (the image becomes
brighter), and minus compensation results in the decreased exposure (the
image becomes darker).
Calibration compensation should be made after sufficient testing of the
camera or film in use indicates the necessity.
l
l
Press POWER button to exit Calibration compensation mode.
1)
2)
3)
4)
25
M
O
D
E
POWER button
ISO button
Calibration
compensation mode
Selected
Display mode
Compensation
amount