Operation Manual

2
2
Explanation of the Liquid Crystal Display (LCD)
* For explanation purposes, the display illustrated here shows icons and
readouts simultaneously. Actual display will never appear like this.
6 1 2
435
Measuring Mode icons (for PHOTO mode only)
Ambient (See page 16)
Auto Reset Cordless Flash (See page 21)
Cord Flash (See page 19)
ISO Display (See page 11)
Displays ISO Film setting.
Measurement value display
Appears when aperture value is displayed.
Appears when using EV mode. (See page 17)
0.1 step display
Depending on set mode, this displays measurement value at 1/10 aperture or
1/10 EV. (See page 12)
Shutter speed, frames rate (f/s), shutter angle and Illuminance.
Appears when Shutter Speed Priority (T) mode. (See page 12, 16)
Appears when shutter speed is in full seconds. (See page 12, 16)
Appears when cine speed is set in frames per seconds. (See page 13, 14)
Appears when shutter angle is set to a value other than 180 degrees (CINE
mode only. See page 15)
Appears when Lux is selected (Selectable in Custom setting) (See page 13, 15)
Appears when FC is selected (Selectable in Custom setting) (See page 13, 15)
Battery Power Indicator (See page 4)