Operation Manual

31
5-1-5. Measuring Exposure for Video and Movies
1) CINE Mode
This is a measuring exposure for cine cameras
1. Touch the Measuring mode icon to open
the Measuring Mode Selection Screen,
then touch the
icon to select CINE
Measuring Mode and return the screen view
to Measuring screen. (See P25 for details.)
2. Set frame rate on f/s icon.
3. Touch the ISO icon to expand it, and set ISO
sensitivity value. The ISO icon will return to
its reduced size after a setting is made and
the icon is not touched for a short time
4. Touch the ANG icon to expand it, and set shutter
angle value. The ANG icon will return to its
reduced size after a setting is made and the icon
is not touched for a short time
5. Add any lter compensation value to adjust the
reading to the light source or lens ltration in
use. (see P51 for details)
6. Press the Measuring button
8
on the side of
meter.
Release the Measuring button
8
to
complete the measurement. The measured
f-stop (aperture) value at that time will be
displayed.
While pressing the Measuring button
8
, the
meter measures continuously until it is
released.
<
•
F-stop (aperture) values can be displayed in full, 1/2 and 1/3 stop increments in Custom Setting (See P55 for details.)
•
ere are 20 preset of frame rates that can be set at “Edit Frame Rate” in the MENU list. (See P58 for details.)
•
ere are 20 preset of shutter angles that can be set at “Edit Shutter Angle” in the MENU list (See P59 for details.)
•
After taking a measurement, changing frame rate value will also change the measured value (f-stop).
•
After taking a measurement, changing ISO value will also change the measured value (f-stop).
•
After taking a measurement, changing shutter angle will also change the measured value (f-stop).
•
Touching the Average/ΔEV button ( ) at the bottom of the screen activates the Contrast Function. (See P50 for
details.)
•
e Analog Scale display will change according to Measuring Mode, Incident/Reected and Mid-Tone mode selected as
well as “Set Analog Scale” in Menu list (See P19 and P53 for details.)
•
See P42 for details about reading outside the display range or beyond the measuring range
Setting
value
Measuring value
(illuminance)
Measuring Screen (cine camera)
Measuring value
(f-stop)