Operation Manual
41
,
•
e working distance of the radio triggering system can vary with the orientation and location of the meter and
receivers. Be sure to carefully set them within their specications.
5-3-4. Measuring in Radio Flash Mode
Select Radio Triggering Mode within Custom Setting.
(See P55 for details.)
a. Touch the Measuring mode icon to open
the Measuring Mode Selection screen,
then touch the
icon to select Radio
Triggering Mode and return the screen
view to Measuring screen. (See P25 for
details.)
b. Set the ISO sensitivity value on the ISO
icon.
c. Set the shutter speed on the T (shutter
speed) icon.
* Be sure the settings are within the
specications of the ash equipment.
d. To adjust ash intensity, touch the Power
Control icon
and make adjustments as
described in 5-3-3.
e. Be sure the Channels and Zones are the
same for meter and the radio receivers in
use.
f. Press the Measuring button
8
on the
side of meter to radio trigger the ashes
and display the measured exposure value
(f-stop).
Measuring Screen
(Radio triggering mode)
ControlTL
®
channel &
zone display
Standard
channel &
zone display
Percentage
of ash
Setting
value
Measured value (f-stop)