Operation Manual

43
6 Functions
6-1. Memory Function
This meter can store up to nine measured values in memory for incident light
and reected light simultaneously. This function can be used in all modes except
Illuminance/Luminance measuring and Multiple (cumulative) Flash modes.
6-1-1. Memory
1. Press the Measuring button
8
on the side of
meter to take a measurement and display a
value on the measuring screen.
2. Press the Memory button
5
to memorize
measured value. An M 1 will appear at the to
of the screen to indicate one value has been
memorized and an indicator will appear on the
analog scale.
3. Repeat steps 1 and 2 as desired to memorize
up to 9 values for comparison.
,

Memory Function cannot be used with the following modes.
• IlluminanceMeasuringMode(lux,fc)
• LuminanceMeasuringMode(cd/m
2
,)
• CordFlashAccumulativeMode
• CordlessFlashAccumulativeMode
• RadioFlashAccumulativeMode(forL-478DRonly)

e tenth or more measurement will be displayed but can not be memorized.
Setting
value
Measuring
value (f-stop)
Example of T priority
in Ambient light
Memorized measuring values (f-stop)