Operation Manual

55
6-6-3. Custom Setting Function
This enables quick and easy setup of individual meter preference.
1) Custom Setting Function List
Setting No. Custom Setting Name Item
Default
Setting
1 Increments of T+F 1 step*
1
1/3 step 1/2 step - 1 step
2 Display of 1/10 Step Increments*
2
On O - - On
3 Compensation +/- Preference Additive
Direction
Subtractive
Direction
- - Additive
Direction
4 Switching Measuring/Memory
Buttons*
3
Standard Reverse Auto-
Switching*
3
- Standard
5 Ambient Mode*
4,8
On O - - On
a) T Priority Mode*
4
On O - - On
b) F Priority Mode*
4
On O - - On
c) T+F Priority Mode*
4
On O - - O
d) HD Cine mode*
4
On O - - O
e) Cine mode*
4
On O - - O
6 Flash measuring*
5,8
On O - - On
a) Cordless mode*
5
On O - - On
b) Cord-in mode*
5
On O - - On
c) Radio trigger mode*
5,6
(L-478DR only)
On O - - On
c)-1 Radio System Preference*
6
(for L-478DR only)
ControlTL Standard ControlTL +
Standard
ControlTL +
Standard
d) Multiple (Cumu.) Flash Mode*
5,7
On O - - O
7 Additional Data None EV
Luminance/
lIluminance
- None
8 Illuminance/Luminance Unit Lux (lx) or
cd/m
2
Foot-
candle (fc)
or Foot-
lambert ()
- - Lux (lx) or
cd/m
2
9 Illuminance/Luminance Individual
Display
On O - - O
10 Color Theme Black White Rose Blue Black
11 Auto Power O 5 min. 10 min. 20 min. No auto
power o
5 min
12 Backlight Brightness Bright Normal Dark - Bright
13 Auto Dimmer 20 sec. 40 sec. 60 sec. No dimmer 20 sec.
14 Reset Custom Setting *
9
Select [OK] or [Cancel] to reset Custom Setting
*1 1/10 step increments is always displayed in the setting of 1 step regardless of setting of “2. Display of 1/10 Step Incre-
ments”.
*2 1/10 step increments ON/OFF will be eective only when 1/3 step or 1/2 step is selected.
*3 Auto switching: Measuring button
8
and Memory button
5
will be standard conguration in incident light mode,
however the button conguration will be switched (in reverse) automatically in reected light mode.
*4 When Ambient Mode is set to O, sub settings of a) T priority Mode to e) Cine Mode cannot be selected.
*5 When Flash Mode is set to O, sub settings of a) Cordless Mode to d) Multiple (Cumu.) Flash Mode cannot be selected.
*6 When Radio Triggering Mode is set to O, sub setting of c)-1 Radio System Preference cannot be selected.
*7 When Multiple (Cumu.) Flash Mode is set to On, the following mode is active in the Measuring Mode Selection screen:
Cordless Multiple (Cumu.) Flash mode, Cord Multiple (Cumu.) Flash mode and Radio Triggering Multiple (Cumu.) Flash
mode (for L-478DR only).
*8 When both Ambient Mode and Flash Mode are set to O (all measuring modes are o), only T Priority Mode in Ambient
Light is active.
*9 This operation returns all items set in Custom Setting to the default settings. Touch [OK] to return default setting or touch
[Cancel] to cancel the reset of custom setting.