Operation Manual

58
9. Input/Edit the camera /lm prole
characteristics.
a. Touch +/- buttons or move slider to set
desired exposure compensation value within
+/- 5 EV (stop) range.
b. Touch +/- buttons or move slider to
desired values of dynamic ranges and
clipping points for prole within +/- 10 EV
(stop) range.
* Clipping points cannot exceed Dynamic
range.
c. Touch
[OK] to return to ISO selection
screen. (Touch
[Cancel] if editing is not
needed. Touch
[Default] if reset the prole
of ISO being selected.)
10. Touch
[Close] to return to Start screen for Edit
prole. Create or Edit prole name if desired (See
P55 for details)
11. Touch
[Close] to return to the Select Prole to
Edit/Check screen.
6-6-5. Frame Rate Editing
In addition to the standard frame rates available in the L-478D/DR, up to 20 frame rates
can be customized and displayed in the meter screen.
* Frame rate is set in 0.001(f/s) step over a range of
0.001 to 9999.999(f/s).
1. Press the Menu button
7
on the meter. (See P21
for details.) to open the Menu screen.
2. Touch
[6. Edit Frame Rate] to display Select
Frame Rate to Edit screen.
3. Touch the check box
to display the
customized frame rate in the f/s setting icon in
the Measuring screen for HD CINE mode and
CINE mode. (A check mark
indicates frame
rate is available for use. To deactivate the frame
rate, touch box again to return to □.)
4) Touch ▲
/▼ or slide nger on bar to select frame
rate and touch one of the frame rate button to
display Input Frame Rate screen.
5) Touch buttons on the keypad to input the
value of frame rate (See P13 for details on
inputting.)
6) Touch
[OK] to return to Select Frame Rate to
ISO Selection Screen
Prole Characteristic Edit
Screen
Exposure Comp.
Value
Dynamic
range (+)
Clipping point (+)
Clipping point (-)
Dynamic
range (-)
Frame rate Edit Selection Screen
Input Frame rate Screen
Check to display or not in the Frame
Rate setting in the Measuring Screen