Operation Manual

6-6-7. Filter Name Editing

In addition to the standard frame rates available in the L-478D/DR, up to 30 Filter Name and

compensation value can be customized and displayed in the meter screen.

* Filter compensation is set in 1/10 steps in a range of ±5.0EV.

* See P65 for details on registered lter name and value.

1. Press the Menu button

on the meter to open the Menu

screen. (See P21 for details.)

2. Touch the

[8. Edit Filter] at the Menu screen.

3. Touch the check box to display the customized Filter

name in the Filter pack in use (Filter compensation) in

the Tool Box.(A check mark indicates the Filter name is

available for use. To deactivate the Filter name, touch the

box again to return to □.)

4. Touch the arrows ▲/▼ or slide nger on the bar to select

the Filter name to display the Edit Filter screen.

5. To edit the lter name, touch the

[Edit Filter Name] to

display the keypad. Input the name (Up to 31 characters)

and touch

[OK] to enter the lter name and return to Edit

Filter screen. (See P13 for details on inputting the name.)

6. Touch the

[Edit Filter Comp. Value] to display the keypad.

Input the lter compensation value (+/-5.0EV in 1/10 step

increments), and touch the

[OK] to enter the lter comp.

value and return to Edit Filter screen. (See P13 for details on

inputting.)



Filternameandcomp.valuefrom1to24arepresetasshownin“8.RegisteredFilters”onpage65.However,these24

presetlterscanbefreelyedited.



Foradditionallternameandcomp.value,useltersfrom25to30.

7. Touch the [Close] to return to start screen for Select

Filter Name to Edit screen. Create or Edit other Filter

name and value if desired.

8. Press the Menu button □ to return to the Menu

screen.

Edit Filter Screen

Edit Filter CompensationScreen

Filter

compensation

value button