Operation Manual

65
7 Optional Accessories (Sold Separately)

Synchro Cord
This is a ve-meter long cord with three plugs.
An exposure meter, a camera and a ash can all
be connected at the same time without need to
plug or unplug the cord during a shooting. Also,
one of the terminals has a locking mechanism to
ensure connection with a meter.
Cord has two male connectors and one female
one.
The connector with the lock function is a male
one.

18% Standard Gray Card
This is a gray card (110mm x 102mm = 4.3” x
4”) with 18% reection ratio, and folds to 72mm
x 125mm (=2.8” x 4.9”) to t in a shirt pocket.
Use this for proper reected light measurements
of mostly bright (white) or dark (black) subjects.

Exposure Prole Target II
Simpler to use, this is the test target (350mm x
120mm = 13.8” x 4.7”) used to create camera
exposure proles. One side consists of a
central 18% gray patch that is surrounded by
25 patches arranged in 1/6th stop values that
are successively brighter and darker, while the
other side is 18% gray card, so it can be used
to determine digital camera white balancing and
spot metering.

Exposure Prole Target
This is more economical test target (260mm x
160mm = 10.2” x 6.3”) used to create camera
exposure proles. One side is nine gray patches
including black and white, and the other side
is an 18% gray card for digital camera white
balancing and spot metering.

Viewnder 5°
This is a viewnder with a ve degree light
receiving angle for spot metering in reected
light.
It is useful for distant objects such as landscapes,
when you cannot go to the position of the subject
, or for metering subjects that generate light (neon
signs, etc), highly reective surfaces or translucent
subjects (stained glass, etc). (See P24 for details.)