Operation Manual

-30-

6. Advanced Functions

8. Filter compensation

Filter compensation (1)

It is possible to compensate for filter factory within a range of ±5.0 EV in 1/10 steps. The measurement

corresponding to the set compensation is displayed while pressing ISO2 button y.

1. Select setting number 1 and item number 1 in the custom setting mode (refer to P32).

2. Set the desired compensation by turning the Jog wheel t while pressing ISO2 button.

Filter factor number compensation (2) (558 CINE only)

1. When using in cine industory, it is possible to set 7 different frequently used types of filters.

2. Select setting number 1 and item number 2 in the custom setting mode.

3. The symbol of the desired filter from among the 7 types can be selected by turning the Jog

wheel t while pressing ISO2 button y.

4. After filter compensation, the filter symbol and cmpensated F value or EV value are displayed

while pressing ISO2 button.

Filters, LCD Display and Corrected Value

Filter Factor No. 85 NDO.3 NDO.6 NDO.9 85N3 85N6 85N9

LCD display 85- n3- n6- n9- A3- A6- A9-

Compensated value (EV) -0.7 -1 -2 -3 -1.7 -2.7 -3.7

(Filter factor numbers are Kodak Wratten filter numbers.)

Display in finder

L-558

L-558CINE

Display in finder