Technical data

-49-

7. Camera Exposure Profiling

2-2 Manual Input of Exposure Profile

It situations where it is not possible or convenient to use a computer or the Sekonic Data

Transfer Software, Exposure Profile data can be entered into the L-758DR (L-758D or L-758CINE)

directly. Below is the step by step process for manually entering a specific Exposure Profile.

1) With the meter turned off,enter the Camera Expo-

sure Profiling mode by pressing the Power button

while pressing the AVE../ EV button at

the same time.

2) In the Camera Exposure Profiling mode, the cur-

rent (or default) contents are displayed.

3) Setting Individual Exposure Profiles (Camera 1, 2

and 3)

Press MID.TONE button while pressing ISO1

button to select the desired camera exposure

profile.

4) Setting measuring mode

Rotate the Jog wheel while pressing the Mode

button to select measuring mode (ambient or

flash including all flash mode)

5) Setting light receiving method

Turn the Incident/reflected spot selector dial to

select incident or reflected light.

6) Setting ISO sensitivity

Rotate the Jog wheel while pressing the ISO1

button to select ISO sensitivity.