Operation Manual

-28-
7. Wireless flash radio triggering function
With the radio transmitter module plugged into the meters radio compartment and a receiver (RR-32
or RR-4 sold separately) connected to one or more electronic flash units, the meter provides a
convenient system that enables one person working alone to measure flash output without the need
of a sync cord. Pressing the measuring button simultaneously triggers the flash and measures the
light.
The L-358 has 32 triggering channels when the radio-triggering module (RT-32) is plugged into the
radio compartment. Channels 1-16 provide single triggering, while channels 17-32 offer Selective
Quad-Triggering capability.Selecting one of channels (17-32) provides control of up to four additional
sub-channels (A, B, C, and D). Selecting or deselecting of zone lighting is possible with sub-channels.
In order to trigger flash units set for sub-channels, the electronic flash unit must be connected to an
RR-32 receiver (sold separately). With an RR-4 receivers (sold separately) triggering channels 1-4
can be selected.
< Example with optional radio receiver RR-32 >
1. Open battery cover !6, remove connector cover @2
and set the radio transmitter module (optional) by
aligning the connector with the pins.
2. Switch to the Wireless flash radio triggering setting
mode
by using Jog wheel t while pressing mode
set button !0.
CAUTION
• To prevent damage due to static electricity, release static electricity stored in your body
by touching a metal object nearby (door knob, aluminum window frame, etc.) before
touching the radio transmitter module.
6. Advanced Functions
MODE
RT-32
radio transmitter
module