User Manual
Table Of Contents
12
2. About PocketWizard Wireless Technology
●
2)
How to Use Flash Power Control
Power Control Function is available with ControlTL system only. Make sure that plug-
in external or built-in PocketWizard receivers and ash unites are compatible with the
function of ash power control.
1.
Touch the [Power Control] Icon ( ) on the Measuring Screen.
The Power Control Screen is displayed.
2.
Select one or more Zones (A to C) 4 and the Power Bar 2 will be
activated.
Only ash unit with the receiver set to the selected Group is red.
3.
Press the Measuring Button 6.
The ash units of the selected Zones are red, and the
measured value (F-stop) is displayed at the top of the bar
1
and the “F Total” box at the bottom right of the screen
6
.
4.
Move the slider or touch the [+] or [ - ] Icons 2
to change the power of ash.
The set power level is displayed in the area above the slider
1
.
NOTICE
Although up to +/- 3 step of value (f stop) can be set, the adjustment must be within the
upper and lower limit of the power level specication of the ash unit.
Measuring Screen Power Control Screen
[Power Control] Icon
1
2
3
4
6
5
Power Control Screen