User Manual

23
2. About PocketWizard Wireless Technology
●
NOTE
● When the measured value display area is touched, both ash waveform graph and measured
value are displayed. When it is touched again, the display returns to the previous screen.
● Measure the ash light characteristics in a darkroom without ambient light.
● When using a ash with a pre-ash function, set the “Number of Pre-ash” in the Tool
Box to cancel out the pre-ashing. (

P24)
● To set ISO sensitivity and shutter speed, press the [Radio Triggering Flash Mode] Icon
( ) to return to the Measuring Screen.
● The last selected zones in either Power Control Screen or Radio CH/Zone Setting
Screen in Tool Box are activated in Measuring Screen.
● For radio CH frequencies, refer to “5. Radio Channel Frequencies”. (

P24)
Measuring Screen
Flash Duration Analysis Cordless
Mode Flash Waveform Graph Screen
Touching the
Measured
value area
changes the
display.
* The graph screen cannot be used to make measurements.