User Manual

2
2. About PocketWizard Wireless Technology
●
2.
About PocketWizard Wireless Technology
2-1
How to use L-858D with PocketWizard
Wireless Technology
Plug-in external or built-in PocketWizard receivers are required to work with the
PocketWizard wireless technology.
Once the transmitter module is installed in your L-858D, you will be able to adjust the
power level and trigger ashes to get the look you desire. For more information about the
meter, refer to the L-858D Operating Manual.
For more information about PocketWizard, go to www.pocketwizard.com.
<Standard System>
PocketWizard Standard system provides simple triggering and do not allow power
control. The Standard system features 32 channels: Channels 1-16 re single trigger
signals; Channels 17-32 have four zones (A, B, C, D) which enable triggering four
separate ashes on each channel.
<ControlTL System>
When used with ControlTL receivers, the L-858D is capable of controlling the power
level of the compatible ashes connected.
The ControlTL system features 20 channels for FCC&IC version or 3 channels for
CE version, and three zones (A, B, C) allowing control of three separate ashes on
each channel.
<Radio Frequency>
To comply with local broadcast regulations, Sekonic wireless systems sold in the
various markets around the world are designed to operate at different frequencies.
Sekonic meters have built-in transmitting antennas that are specically tuned for
their market area. When purchasing and/or installing a transmitter module or using
the meter with a receiver, be sure that the meter and receiver are designed to be
used in your location and use the same frequency.
●
USA/North American market frequencies (FCC & Canada IC): 344.0 to 354.0MHz
●
European and other market frequencies (CE, NCC or OFCA): 433.42 to
434.42MHz