ESPRIT BURGLAR ALARM CONTROL PANEL Welcome to the world of ESPRIT technology. Your Esprit control panel has been designed with ease of use and simplicity in mind. We’ve developed a highly advanced technology control panel with powerful features that ANYONE can use, without memorizing complex, confusing codes or taking a course in computer programming!! Not only is ESPRIT easy to operate, with many functions accessible by one touch of the keypad, but it’s also functional and stylish.
office/warehouse buildings, or apartment/condominium complexes. The ESPRIT keypad’s comprehensive 12 zone keys, 8 function keys and keypad sounder serve to keep you instantly aware of alarm, system and operational status. Motion detectors, smoke and glass break detectors, as well as vibration/shock and door/window contact sensors will all report to ESPRIT’s RISC microprocessor brain, and vital security information will be communicated to you by the keypad display.
entered on the keypad, the sounder emits a continuous beep tone. "PARTITIONING" (not available on all models) Based on your instructions, your installer can program your panel to recognize and control 2 separate systems by activating the panel's "partitioning" feature. When partitioning is activated, each zone can be defined as belonging to System A, System B, both systems (dual area), or no system assignment (common area).
Each access code is made up of 4 or 6 digits (programmed by your installer). The master code 474747 and user codes are identified by a 2 digit "code number".
order to arm the system. This light will only illuminate if all zones are closed. All doors and windows must be closed, and there can be no movement in areas monitored by motion detectors. Once the "READY" light is on, enter your user code. If you make a mistake entering your code, the keypad sounder “END/REJECTION” beep will let you know. Just press [CLEAR] and re-enter the code.
for the "READY" light before “Stay“ arming, however all zones that have been programmed by your installer to arm in "Stay" mode, must be "closed" (no movement in the zones when arming the system). Pressing key [STAY/11] steadily for 2 seconds will automatically "Stay" arm the system. Double “Stay” arming: During the exit delay, pressing [STAY/11] again will switch any “delay 1” or “delay 2” zones to “instant” zones. 24 hour “Stay” zones, follow “Stay” zones, and instant “Stay” zones are not affected.
house, or for any other reason you need to leave a zone open. If a component of your security system is damaged, it can also be bypassed until repairs are made. Manual bypass arming instructs the control panel to ignore zones that you designate “open”, so that the rest of the system can still be armed. (Based on your instructions, only zones that your installer has programmed “bypass-enabled” can be bypassed during manual bypass arming, “auto-bypass (Away)” arming or “Stay” arming.
Note: These features are not recommended for regular use because leaving zones open can reduce the efficiency of system protection. (Force arming and auto bypass away arming are ideal for use with overhead garage doors!) "No movement" supervision feature Your panel can be programmed to send a report and/or arm the system if it is not armed (full or “Stay arming”) and there is no zone activity for a preprogrammed amount of time.
A zone belonging to a “common area” is a zone that is armed only when both systems are armed, and disarmed if “System A” or “System B” is disarmed. Note: "System A" codes can stop sirens coming from "System B" zones (and vice versa), but will not disarm a system that is in alarm. Once zones have been assigned to either "System A" or "System B", code definition, also programmed by the installer, determines which access codes can arm "System A" zones, as well as which codes can arm "System B" zones.
Programmable output Not only does your Esprit control panel provide top security, it also offers you total convenience. Your installer can program the panel to reset smoke detectors & Glasstreks, to activate strobe lights, to activate light switches in your home or office, to reduce or increase building temperature, turn on/off air conditioning, open/close automatic garage doors, and more.
in memory. Pressing on any key except [2ND] will return the keypad to normal zone display. Trouble conditions will remain in "trouble" memory. Pressing on the [2ND] key displays current trouble conditions. Pressing [CLEAR] will erase trouble conditions in memory. Control panel software versions 2.00 and beyond: Keys that illuminate in “trouble display” mode indicate the trouble conditions currently taking place. Press on any key to return keypad to normal zone display.
Key [8] Timer loss If the system timer is not functioning, usually after total battery and AC power failure, key [8] illuminates. The timer should be reprogrammed after total power loss. To reprogram the timer (control panel software versions prior to 2.00): Press [ENTER] + master code/user 1 code + [MEM]. Then enter 2 digits (00 to 23) for hours, followed by 2 digits (00 to 59) for minutes. Press [ENTER] twice. If trouble key [8] is still illuminated, press [TRBL] + [CLEAR] after programming the time.
Providing a Fire Warning System Household fires are especially dangerous at night. Fires produce smoke and deadly gases that can overcome occupants while they sleep. To warn against fire, smoke detectors should be installed outside of each separate sleeping area in the immediate vicinity of the bedrooms and on each additional story of the family living unit, including basements.
KEY ACCESS PROGRAMMING Several control panel features can be programmed quickly on the keypad, without entering any programming addresses or section numbers. [TRBL] Call Espload via telephone If programmed by your installer, this initiates communication to the central monitoring station computer using Espload software. Select “one-key access” programming mode by pressing [ENTER], followed by master or user code 1. Then press the single key (listed below) corresponding to the feature you wish to activate.
IMPORTANT: Keep this information in a secure location.
Name N 4 digit ACCESS CODES Code Arming Priority N 6 digit Reg.
SPECIAL KEYS AND FUNCTIONS N Key [10] Regular arming is activated. N Key [STAY/11] “Stay arming” is activated (Arms system A only, when partitioning is enabled) [1] and [3]* Police or N Silent N Audible N Not Used [4] and [6]* Auxiliary or N Silent N Audible N Not Used [7] and [9]* Fire or N Silent N Audible N Not Used *Both keys must be depressed at the same time for 2 seconds - Armed LED will flash. The PGM (Programmable Output) function (if and is activated applicable), is by .
34 35
WARRANTY The Seller warrants its products to be free from defects in materials and workmanship under normal use for a period of one year. Except as specifically stated herein, all express or implied warranties whatsoever, statutory or otherwise, including without limitation, any implied warranty of merchantability and fitness for a particular purpose, are expressly excluded.