User`s manual

20 User’s Manual
4.4.1 Instant Arming
After Stay Arming the system and during its Exit Delay,
press and hold the [STAY] button for 3 seconds. You should
hear a confirmation beep. The system is then Instant Armed.
Therefore, any armed zone that is breached will immediately
generate an alarm.
If you have access to both partitions:
To Instant Arm one partition
1) Press the [STAY] button
2) Enter your [ACCESS CODE]
3) Choose a partition
4) Press and hold the [STAY] button for 3 seconds
To Instant Arm both partitions
1) Press the [STAY] button
2) Enter your [ACCESS CODE]
3) Press [1]
4) Press [2]
5) Press and hold the [STAY] button for 3 seconds