User`s manual

24 User’s Manual
4.7 ONE-TOUCH ARMING
One-Touch Arming allows you to arm the system without
using an access code.
4.7.3 One-Touch Regular Arming
Press and hold the [ENTER] button for 3 seconds (see Note1,
p.23) to arm all zones in the partition. You can use this
feature to allow specific individuals like service personnel (i.e.
cleaners) to arm without giving them access to any other
alarm system operations. For details on Regular Arming,
refer to section 4.3.
4.7.4 One-Touch Stay Arming
Press and hold the [STAY] button for 3 seconds (see Note1,
p.23) to arm all zones not defined as Stay Zones. For details
on Stay Arming, refer to section 4.4.
4.7.5 Fast Exit
WHEN THE SYSTEM IS ALREADY STAY ARMED: this feature will
allow you to exit already armed premises and keep the
system armed.
How Do I Recall Bypass Entries?
5) Press the [BYP] button.
6) Enter your [ACCESS CODE] (see Note1, p.23).
7) Press the [BYP] button.
8) Press the [ENTER] button.