Instructions / Assembly
2
© Selecto, Inc.
PACKAGE CONTENTS
1 Filtration Cartridge
1 Lubricant Pack
Instructions/Assembly Use and Care Manual
THANK YOU FOR PURCHASING OUR PRODUCT
Everyone here at Selecto, Inc. would like to thank you for your support and
continued use of our products. We believe everyone should have access to safe,
clean water. Your purchase is a signicant step towards a clean future.
GENERAL NOTES
WARNING
It is important to ensure that you are in compliance with all applicable state and
local plumbing codes before you start installation of this product.
1) Read and understand all of the instructions before attempting to install and operate this equipment. Failure to do
so may result in injury and damage to person and/or property.
2) Wear adequate eye protection and protective clothing when installing, operating, and servicing the unit.
3) Do NOT install system direct to the sunlight or freezing environment.
4) Be aware of touch or heat which can damage the plastic lter and/or ttings; always keep at least a 18” away
from plastic components when working on the hard piping.
5) Check all connections for leaks before operating the unit.
6) Check that all clips are in the right position.
OPTIONAL PARTS LIST
Assembled Head #: 300-778HD
Pressure Gauge #: 300-023FA
Plastic 3/4” Shut-Off Valve #: 300-743
Inlet Fitting 3/4” #: 300-714
Outlet Fitting 3/4” #: 300-720
Pressure Relief Valve #: 300-738
3/4” Plug #: 300-715
Blue Retaining Clip #: 300-708E