Instructions / Assembly

INSTALLATION PROCEDURES

INSTALL FILTER HEAD:

For Hard Copper Pipe Installing (steps 1 to 6 of 11):

A. Filter Head Assembly

1. Center, level, and mount the

lter heads

4. Connect inlet tting onto 3/4”

hard piping

2. Remove blue clip from inlet side

5. Reconnect plastic tting back to

the lter head

B. You can slide the heads out toward either side of

channel to separate backplate for easy installation

3. Pull and separate inlet Shut-Off

valve tting

6. Re-install retaining blue clip

Tap Water

Inlet

Filtered Water

Outlet