Instructions / Assembly

6
© Selecto, Inc.
TROUBLESHOOTING AND REPAIR
All SuperPlus Filtration Systems are fully inspected and pressure tested by factory. IF LEAKS- Note: The inlet shut-off
valve must be turned “OFF” (handle in vertical position), and pressure relieved by pushing the “Red” pressure relief
button before attempting to x any leakage problems.
1. Leaks Between Cartridge and Filter Head While looking at the top of the lter system, grasp the cartridge and turn
slightly counter-clockwise, when viewed from bottom and then back clockwise, making sure that the ears on the
cartridge are fully engaged into the lter head. The “blue” locking ears on the cartridge should be fully visible in
the 4 recesses on the “black” lter head.