User's Manual

ManualsBrandsSelex ES ManualsElectronicsVS3000 GTW/ 806-870

P/N MAN-0698/01.01P/N MAN-0698/01.01P/N MAN-0698/01.01P/N MAN-0698/01.01

How to...

Access the send status menu, pressing the key associated

with

when the radio is in idle status or selecting from main

menu: Messages

→→

→ Send Status.

Select the status to be sent, then select an user by means of the

key associated with

or a group by means of the key asso-

ciated with

. To send the message use the key or select

the Send option.

Access the text messages selecting from main menu Mes-

sages

→→

→ Text Message. Create a new message or select a

predefined message then select OPT

→→

→ Send.

Select an user (

) or a group ( ) and send the message by

means of key

or selecting the option Send. During the

editing of a message it is possible to change from uppercase

to lowercase pressing the key .

Access the received messages list from main menu selecting

Messages

→→

→ Inbox. Use the keys

, to scroll the list

of messages. The received messages can be status

or text

messages. Select the message to be read (VIEW) and

then OPT to choose among Delete-Reply-Reply+History.

From idle status press key

to display the list of the last 20

received/made individual calls. Scroll them by means of keys

, . It is possible to recall the subscriber pressing the

key

followed by the PTT pressing (Half-Duplex call) or

followed by the pressing of the key

(Full-Duplex call, TMO

only).

It is possible to go back in a group call which is still active and

from which you have disconnected: in TMO by pressing the

PTT and in DMO by keeping pressed the key

From main menu select Settings

→→

→ Speech monitor, to

change the function status. If the speech monitor is active the

user will be asked to deactivate it and vice versa. By pressing

the key corresponding to YES the change is confirmed; by press-

ing the key corresponding to NO or the key

the user can exit

the menu without modification.

From main menu select Settings

→→

→ SDS monitor, to change

the function status. If the SDS monitor is active the user will be

asked to deactivate it and vice versa. By pressing the key cor-

responding to YES the change is confirmed; by pressing the

key corresponding to NO or the key

the user can exit the

menu without modification.

From main menu select Settings

→ →

→ Preferences

→→

→

Presence Signalling To enable the transmission of presence

signal select PsOn; select PsOff to disable it.

From main menu select GPS. The data relative to vehicle

position will be shown on the display.

Activate Bluetooth functionality selecting Settings

→→

→

Bluetooth

→→

→ Activation. Once Bluetooth is active the sym-

bol appears on the radio display. Note: If the radio is turned

off with the Bluetooth active, at the successive switch on the

Bluetooth is deactivated.

With Bluetooth functionality active select the menu item Find

New from Settings

→→

→ Bluetooth

→→

→ Devices. Once the device

has been found check if it is "Trusted" or "Untrusted" through

the menu item Devices List from menu Settings

→→

→

Bluetooth

→→

→ Devices, showing the device information. If the

device is "Untrusted" select OPT from the display showing the

device information, and then select Service Search.

Menu main items

 NOTE:

For what concerns technical characteristics, reference standard,

maintenance and troubleshooting, refer to the relevant technical handbook.

TETRA Operating modes

The vehicular radio terminal can work in four different TETRA

operating modes, depending on the protocol selected in menu

Change Mode: Trunked Mode (TMO), Direct Mode (DMO), Repe-

ater Mode (REP), Gateway Mode (GTW).

TMO

DMO

REP

GTW

* *

Send a status

message

Send a text mes-

sage

Read a received

message (Inbox)

Access last calls

list

Go back in a group

call

Enable/Disable

the speech

monitoring

function

Enable/Disable

the SDS

monitoring

function

Enable/Disable

the presence

signal

Visualize

GPS data

Activate Bluetooth

(*)

Connect with

Bluetooth device

(*)

How to...

See the relative accessories user’s guide.

Keep pressed the key

for a few seconds.

PIN insertion at power on, can be:

• Enable/disabled from menu

• Always enabled

• Always disabled

If PIN insertion is enabled, at power on the user must insert the

current PIN. In case of insertion of 3 consecutive wrong pin, the

current PUK must be inserted to unlock the radio. In case of 3

consecutive wrong PUK insertion the radio must be repro-

grammed to be unlocked.

To adjust the volume of the various sounds access from main

menu to Settings

→→

→ Preferences

→→

→ Sounds.

In the vehicular configuration: to adjust the speech volume,

use the volume knob; turn it clockwise to increase the volume

and counterclockwise to decrease it.

In the Motorcycle configuration: the triple pushbutton al-

lows the same operativity of the knob.

(“+” and “-” to increase/decrease the volume;

“•” to switch from volume control to group selection function).

In the Vehicular configuration: keep pressed the knob until

the alternate symbols

and appear on the display. The

radio is in group selection mode. Once in this modality turn the

knob to choose among the available groups-channel and select

the group by pressing the knob.

In the Motorcycle configuration: the triple pushbutton al-

lows the same operativity of the knob.

(“+” and “-” to scroll the groups list;

“•” to switch from volume control to group selection and to

confirm the choose).

Press

and then (associated to menu) keys to lock the

keypad; to unlock it press any key and follow the instructions

shown on the display.

Keep pressed key

for a few seconds. Otherwise select

Change mode from main menu and select the modality.

Each WPS is composed of a set of different groups related to

the group selector knob positions. Changing WPS you change

the groups that can be selected by means of the knob. To change

WPS, keep pressed key

for a few seconds. Otherwise

select Settings

→→

→ Group Management

→→

→ WPS Select.

Select the group by means of the relevant knob (in the vehicular

configuration) or the triple push button (in the motorcycle configu-

ration), then press PTT to talk; otherwise type in the group address

and press PTT (if the PTT default modality is set (by PRP) for

individual call, press the key

before pressing the PTT).

Select the group by means of the relevant knob and press the

key

. Now by pressing PTT the first available dispatcher of

the selected group is called (not the gorup). By pressing again

the key and then the PTT the selected group is called.

Keep pressed key for a few seconds, then press PTT to talk.

Type in the address or select a subscriber from phone book

then press key

Type in the address or select a subscriber from phone book

then press PTT (if the PTT default modality is set (by PRP) for

group call, press the key

before pressing the PTT).

Keep pressed the emergency key at least for 2 seconds.

In TETRA mode the radio can be programmed to: send a call

request, send an SDS, send a call request and an SDS, at the

emergency key pressing.

In FM mode, the radio sends an alarm until another radio gives

the received alarm signal throught the key

* * * * *

TMO

DMO

REP

GTW

** * * *

** *

** **

* * *

Change accesso-

ries configuration

Switch on/switch

off the radio

Manage the PIN

(Personal Identifi-

cation Number)

Adjust the

Volume

Change group -

channel

Lock/unlock

keypad

Change modality

TMO/DMO/REP/

GTW/FM (*)

Change

Working Profile

Subset (WPS)

Call a group /

Channel

Call the dispatcher

of the selected

group (if the net-

work allows this

function)

Call the OPEN

GROUP

Make an individual

full duplex speech

call

Make an individual

half duplex speech

call

Send an emer-

gency alarm

How to...

Once the device is "Trusted" select OPT from the display

showing the device information, and then select Service List.

Choose the service scrolling the list through the keys

and

, select OPT and then Connect, to connect to the service.

To remove a Bluetooth device it is first necessary to discon-

nect it closing and removing the relative service:

• select Settings

→→

→ Bluetooth

→→

→ Devices

→→

→ Devices

List;

• scroll the device list till the device to be removed and

select OPT;

• select the item Service List and scroll the Service List till

the service to be close;

• select OPT and then Disconnect. Then, from the same

menu select Remove to remove the service.

Now it is possible to remove the device:

• select Settings

→→

→ Bluetooth

→→

→ Devices

→→

→ Devices

List;

• scroll the device list till the device to be removed and

select OPT;

• select the item Remove Device

• press the key associated with "YES" to confirm the opera-

tion.

To deactivate Bluetooth it is first necessary to remove all the

Bluetooth accessories, then select Settings

→→

→ Bluetooth

→→

→ Deactivation.

Access the monitor menu keeping pressed the key

for a

few seconds from idle status, otherwise select item Monitor

from main menu. Selecting Opt it is possible to choose among:

• Add (to add an user to be monitored);

• Delete (to remove an user to be monitored);

• View (to visualize the details of the last three radio coverage

checks of the specific user).

To make a call in FM mode (whether to a user or to a group)

dial the user or the group address to be called, or select the

address from the Phone lists and press the key

. Press

PTT to talk.

TMO

DMO

REP

GTW

Remove

Bluetooth device

(*)

Deactivate

Bluetooth (*)

Check the

coverage of other

users

Make a call in

FM mode (*)

* * * * *

* * *

** * * *

* * *

*** * *

* *

Messages

By means of this menu it is possible to send text and status

messages, and to read received messages and sent messages that

have been saved. It is also possible to define the text char size.

In Repeater mode with SDS Monitor active it is possible to read

the messages monitored by the radio.

Change Mode

By means of this menu item it is possible to select the transmis-

sion protocol TMO/DMO/REP/GTW/FM.

Encryption (TETRA only)

By means of this menu it is possible to enable/disable the

encryption function.

Phone Lists

In TETRA mode, by means of this menu you can access the

phone books (whether user defined or predefined). In FM mode

you can directly access the FM users list.

Settings

Through the sub-menus of this item it is possible to configure

several options of the radio terminal. For example (in TETRA

mode) it is possible to inhibit the transmission (Tx Inhibit), to

manage the working profiles WPS (Group Management), to ac-

cess the Bluetooth functionalities.

Furthermore through the Preferences menu the user can person-

alize the terminal, setting: language, sounds volume, backlight,

zoom in/zoom out. It is also possible in REP mode, to enable or

disable the presence signal transmission.

In REP or GTW mode it is also possible to enable or disable the

speech monitor function and only in REP mode the SDS monitor

function.

Monitor (FM only) (*)

By means of menu Monitor it is possible to check the radio

coverage of other FM radio users.

GPS

This menu allows to display the GPS data information.

Information

This menu allows to display the equipment information.

Help

Selecting Help from main menu it is possible to visualize the

direct access keys function (direct access keys are available even

during calls). Within the Help menu are also shown: the descrip-

tion of the strings to be dialled to define the call priority, the

gateways and the address composition method (for TETRA). It is

also possible to visualize a brief description of the symbols that

can appear on the display.

(*) Function not available for U.S. market