User's Manual

Selex ES S.p.A.
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by Selex ES S.p.A. in writing
10
4. Technical/Environmental Specification
The main characteristic of the device are:
Radio Frequency:
Frequency range 896 – 941 MHz (RX: 896 – 912 MHz; TX: 927-941 MHz)
(for Canadian and US market: RX: 896 ÷ 901 MHz
/ TX: 935 ÷ 940 MHz)
Channel Spacing 12,5 – 25 kHz
(for Canadian and US market: 12,5 kHz only / Authorized
bandwidth 13,6 kHz)
Channel step 5 kHz – 6,25 kHz
RF Power 10 – 110 Watt (step 0,1 dB), continuous transmission
Modulation type Dual mode
Analog FM/PM (EN 300 086 – EN 300 113)
11K0F3E/11K0G3E
16K0F3E/16K0G3E (not valid for Canadian
and US market)
Digital 4FSK (TS 102 361-1,2,3)
7K60FXD/7K60FXE
C4FM
8K10F1D/8K10F1E
CTCSS 67 – 254.1 Hz (step 0,1 Hz)
DCS yes
Antenna connector 50 Ohm
Emission mode Duplex/Simplex
Receiver sensitivity Analog FM (12,5 kHz):  -112 dBm @ 20 dB SINAD psofo
Digital 4FSK:  -118 dBm @ BER = 5x10
-2
Digital C4FM:  -118 dBm @ BER = 5x10
-2
Power supply:
Input voltage 48 Vdc (35  75 Vdc - galvanically insulated)
Current drain