User's Manual

Selex ES S.p.A.
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by Selex ES S.p.A. in writing
16
After that, following the instruction given in this manual:
 Unpack and inspect the equipment.
 Mechanical install the equipment at the site.
 Make necessary electrical wiring:
- Unit Grounding
- DC/DC input cabling
- Coaxial cables to transmit and receive antennas
 Perform a post-installation function checkout test of the equipment to verify proper
installation.
 Proceed to customize the repeater parameters per customer specifications (e.g.
operating frequency, PL, codes, color code, etc.)
6.1.2 Unpack
Inspect the equipment for damage immediately after unpacking and make a report of the extent of any
damage to the transportation company and to Selex ES S.p.A.
The following items are packed together:
 ECOS-D A2T Radio Base Station
 DC power cable
 This manual
6.1.3 Mechanical installation
The device is shipped in a box. Upon delivery, the equipment must be removed from the container
(see Unpack section) and transferred to a rack or cabinet if not provided.
If the device is supplied without a cabinet it is designed to be fitted in a 19” cabinet using 3 RU of
space.