User's Manual

Selex ES S.p.A.
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by Selex ES S.p.A. in writing
39
6.4.4 LAN Interface
The LAN Interface is a 10BASE-T 100BASE-TX autosensing Ethernet interface with a standard RJ45
connector. Connect it to a hub/switch to provide LAN access to the feature of the RBS. Available
features depend on the settings of the RBS.
Interconnecting points
Type of connector terminating
the cable
Type of cable/conductor
LAN
RJ45 male connector
AWG 24 Category 5
LAN RJ45 female pinout
PIN
1
RX+
Receive Data +
2
RX-
Receive Data -
3
TX+
Transmit Data +
4
not used
5
not used
6
TX-
Transmit Data -
7
not used
8
not used
LAN port