User's Manual

Selex ES S.p.A.
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by Selex ES S.p.A. in writing
40
LAN RJ45 male cabling
PIN
EIA/TIA 568A
EIA/TIA 568B
1
TX+
White/Green
White/Orange
2
TX-
Green
Orange
3
RX+
White/Orange
White/Green
4
Blue
Blue
5
White/Blue
White/Blue
6
RX-
Orange
Green
7
White/Brown
White/Brown
8
Brown
Brown
To connect the RBS to an Ethernet hub/switch use a straight cable (EIA/TIA 568A or EIA/TIA 568B on
both ends).
To connect the RBS directly to an Ethernet host use a cross cable (EIA/TIA 568A on one end and
EIA/TIA 568B on the other end).