User's Manual

Selex ES S.p.A.

Information contained in this document may not be used, applied or reproduced for any purpose unless agreed

by Selex ES S.p.A. in writing

1. Scope

This manual provides experienced technicians familiar with similar types of equipment with information

which permit the installation and maintenance of the described product, whose characteristics are

described in the Technical specification Section.

This document does not contain information of the maintenance and configuration software that are

provided with the software itself.

Information contained in this document are valid only for the model named ECOSD RBS4000K

U5110DA0C14W0E100S1V1G2, whose certification number is FCC ID: X5YF767DHDE-IP and IC:

12512A-F767DHDEIP, of the ECOS-D family of products, optional cards and ancillaries included. The

technicians must use only the part of information related to the RBS really shipped.

2. First aid for electrical shock and safety rules

2.1 First aid for electrical shock

Do not touch the patient with bare hands until the circuit has been opened. Open the circuit by

switching off the line switches. If that is not possible protect yourself with dry material and free the

patient from the conductor.

2.1.1 Artificial respiration

It is important to start mouth resuscitation at once and to call a doctor immediately. Suggested

procedure for mouth to mouth resuscitation method is described in Table 1.

2.1.2 Treatment of burns

This treatment should be used after the patient has regained consciousness. It can also be employed

while artificial respiration is being applied (in this case there should be at least two persons present).

Warning

• Do not attempt to remove clothing from burnt sections

• Apply dry gauze on the burns

• Do not apply ointments or other oily substances.