User's Manual

Selex ES S.p.A.
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by Selex ES S.p.A. in writing
8
Figure 2 Antistatic band
Figure 3 Coiled Cord
Figure 4 Antistatic contact point
3. Encoding criteria for all derived Products
The following table sets out the criteria for coding of products derived from the archetype, and is
specific to an equipment ECOSD A2T-band 896-941 MHz 110W PA.
The model number for each products derived from the archetype, is obtained by assigning to the
variables that make up (highlighted in green), one of the value shown in the table.
Tab. 2
General Code: ECOSD RBS4000K aabbbWAcde4WgE1hmSnVpGr
Frequency Band
aa
aa = U5 (896 - 941 MHz)
aa = 00 - indicates no part radio
RF Power
bbbW
bbb = 110 - Pout 110W
bbb = 000 - indicates no Power Amplifier module
W = W  Configuration without RX Diversity
W = D  Configuration with RX Diversity
Power Supply
Acde
c = 0 - does not provide 12Vdc power supply
Antistatic
contact point