User's Manual

SELEX Communications
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by SELEX Communications S.p.A. in writing
34
July 2010
6.5 Syncronization Interfaces
6.5.1 Main GPS Interface
In order to connect the Main GPS antenna to the RBS, connect the GPS antenna to the SMA-BNC
“Main GPS” connector shown in the following figure.
Interconnecting points Type of connector terminating
the cable
Type of cable/conductor
GPS SMA male connector 50 ohm coaxial cable with
double shield
Main GPS Antenna
Spare GPS Antenna