User's Manual

SELEX Communications
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by SELEX Communications S.p.A. in writing
38
July 2010
6.6.3 Serial Interface
The Serial Interface is an RS232 interface with a standard female type D DCE connector. Connect it to
a DTE to provide serial access to the RBS. Available features depend on the settings of the RBS.
Interconnecting points Type of connector terminating
the cable
Type of cable/conductor
RS232 Male type D connector with 9
pins and shielded holder
9 conductor cable with double
brass sheath type interconductor
Serial Interface