User's Manual

SELEX Communications
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by SELEX Communications S.p.A. in writing
62
July 2010
8.6 Local Test AF Interface
The local Audio Frequency interface is located on the front panel of the RBS on the CORE module.
Use this interface to test the AF performance of the RBS.
Interconnecting points Type of connector terminating
the cable
Type of cable/conductor
Microphone Male type D high density
connector with 15 pins
Section of each wire ≤ 1 sq.mm.
(AWG 18)
Local Maintenance Interface