Data Sheet

ManualsBrandsSelf Electronics ManualsBuilding TechnologySelf Electronics SLT100-12VL-E LED transformer Constant voltage 100 W 0 - 8.33 A 12 Vdc not dimmable, Approved for use o

Constant Voltage LED Power Supply

SLT100-12VL-E

SLT100-24VL-E

Characteristics:

Last update: 13 June, 2017

Page: 1 of 5

www.self-ecg.com

Standards:

Product description

Product description：

EN61347-1

EN61347-2-13

EN61547

EN55015

EN61000-3-2

EN61000-3-3

EN62384

EN62493

Independent power supply for constant voltage LED lamp

Terminal block for quick connection

Class II protection against electric shock from direct and

indirect contact

SELV output(<60V)

Fast start-up time <0.5s

Open circuit，short circuit，over load and over

temperature protection

Auto restart after removal of fault conditions

Efficiency:88.5%（AC230V，full load）

•

This type of power supply is an exclusively designed

stabilized power supply for LED lamp. With constant

voltage (CV) , it is suitable for constant voltage lamps

(12/24V DC) connected in parallels lamps .

The built-in protection circuit will shut down the power

supply in case of such faults as: open circuit, short circuit,

over load and over temperature protection. The power

supply will restart automatically after fault correction.

Summary of content (5 pages)

PAGE 1
www.self-ecg.com Constant Voltage LED Power Supply SLT100-12VL-E SLT100-24VL-E Product description This type of power supply is an exclusively designed stabilized power supply for LED lamp. With constant voltage (CV) , it is suitable for constant voltage lamps (12/24V DC) connected in parallels lamps . The built-in protection circuit will shut down the power supply in case of such faults as: open circuit, short circuit, over load and over temperature protection.
PAGE 2
www.self-ecg.com Specifications Model SLT100-12VL-E SLT100-24VL-E turn on time(S) <0.5 <0.5 output power(W) 100 100 12 24 +/-5% +/-5% 800(Vp-p) 800(Vp-p) 0-8.33 0-4.17 output votage(V) Output output voltage tolerance 1 ripple voltage(mV) working current range(A) Input In dimming interface No dimming range n/a rated supply voltage(Vac) 220-240 220-240 voltage range(Vac) 198-264 198-264 line frequency(Hz) 50/60 50/60 input current(mA) 600 600 88.5% 91.7% 87.0% 86.
PAGE 3
www.self-ecg.com 51 60 31 Dimensions(mm): 177 185 Wiring diagram: L 220-240V AC 50/ 60Hz PRI N LED POWER SUPPLY wire preparation 7-8mm 0 75 . -1.
PAGE 4
www.self-ecg.com Electrical curves: PF vs LOAD(230Vac) 1.00 0.95 0.90 PF 0.85 0.80 SLT100-12VL-E 0.75 SLT100-24VL-E 0.70 0.65 0.60 0.55 0.50 0 20% 40% 60% 80% 100% 120% LOAD EFFICIENCY vs LOAD(230Vac) 0.94 0.92 0.90 SLT100-12VL-E PF 0.88 SLT100-24VL-E 0.86 0.84 0.82 0.80 0 20% 40% 60% 80% 100% 120% note For constant current power supply,"LOAD" means the percentage of the maximum rated output voltage.
PAGE 5
www.self-ecg.com Sales & Technical Support: Self Electronics Co.,Ltd. Self Electronics Co.,Ltd.,Shenzhen Office Add: No. 1345 Ju Xian Road, Ningbo Hi Tech Park, Ningbo, Add: Room2007,Xinglang Xuan,Xinghe Mingju,Fuming China Road,Futian District,Shenzhen Tel: 0086-574-28805765,28805658(For English Assistance) Tel: 0086-755-83558850, 83558851 0086-574-28805678 (For Chinese Assistance) Fax: 0086-755-83558840 Fax: 0086-574-28805656 E-mail: sales@self-ecg.com http://www.self-ecg.