Data Sheet

ManualsBrandsSelf Electronics ManualsBuilding TechnologySelf Electronics SLT75-24VFG LED driver Constant voltage 75 W 0 - 3.1 A 24.0 Vdc Approved for use on furniture, not dimm

Constant Voltage LED Power Supply

SLT75-12VFG

SLT75-24VFG

Characteristics:

Last update: 13 June, 2017

Page: 1 of 5

www.self-ecg.com

Standards:

Product description

Product description：

•



•

•

•

•

•

This type of power supply is an exclusively designed

stabilized power supply for LED lamp. With constant

voltage (CV) technology, it is suitable for constant voltage

lamps (12/24V DC) connected in parallels. As an

advantage of constant voltage (CV) technology, a switch

can be installed between secondary side and lamps.

The built-in protection circuit will shut down the power

supply in case of such faults as: open circuit, short circuit,

over load. The power supply will restart automatically after

fault correction.

Independent power supply for constant voltage LED lamp

Terminal block for quick connection

Class II protection against electric shock from direct and

indirect contact

SELV output(<60V)

Fast start-up time ≤0.5s

Open circuit，short circuit，over load and over temperature

protection

Super thin design

No load power consumption≤0.3W

Efficiency:≥91%（AC230V,full load）

EN61347-1

EN61347-2-13

EN61547

EN55015

EN61000-3-2

EN61000-3-3

EN62384

EN62493

Summary of content (5 pages)

PAGE 1
www.self-ecg.com Constant Voltage LED Power Supply SLT75-12VFG SLT75-24VFG Product description This type of power supply is an exclusively designed stabilized power supply for LED lamp. With constant voltage (CV) technology, it is suitable for constant voltage lamps (12/24V DC) connected in parallels. As an advantage of constant voltage (CV) technology, a switch can be installed between secondary side and lamps.
PAGE 2
www.self-ecg.com Specifications Model SLT75-12VFG 0.5 turn on time(S) output power(W) output votage(V) Output output voltage tolerance 1 ripple voltage(mV) working current range(A) Input In 75 12 24 +/-5% +/-5% 500(Vp-p) 200(Vp-p) 0-6.25A 0-3.1A No dimming range n/a rated supply voltage(Vac) 220-240 220-240 voltage range(Vac) 198-264 198-264 line frequency(Hz) 50/60 50/60 input current(mA) 400 400 2 average efficiency 3 no load power consumption(W) 91.5% 91.6% 90.
PAGE 3
www.self-ecg.com Dimensions(mm): 298 262 23 29.8 16.5 Wiring diagram: N 220-240VAC 50/60Hz PRI L LED POWER SUPPLY wire preparation 7-8mm 0.75-1.
PAGE 4
www.self-ecg.com Electrical curves: EFFICIENCY vs LOAD(230Vac) EFFICIENCY 100 95 90 12V 24V 85 80 75 30% 40% 50% 60% 70% 80% 90% 100% LOAD PF vs LOAD(230Vac) 1.00 0.95 0.90 PF 0.85 12V 0.80 24V 0.75 0.70 0.65 0.60 30% 40% 50% 60% 70% 80% 90% 100% LOAD note For constant current power supply,"LOAD" means the percentage of the maximum rated output voltage. For constant voltage power supply,"LOAD" means the percentage of the maximum rated output current.
PAGE 5
www.self-ecg.com Sales & Technical Support: Self Electronics Co.,Ltd. Self Electronics Co.,Ltd.,Shenzhen Office Add: No. 1345 Ju Xian Road, Ningbo Hi Tech Park, Ningbo, Add: Room2007,Xinglang Xuan,Xinghe Mingju,Fuming China Road,Futian District,Shenzhen Tel: 0086-574-28805765,28805658(For English Assistance) Tel: 0086-755-83558850, 83558851 0086-574-28805678 (For Chinese Assistance) Fax: 0086-755-83558840 Fax: 0086-574-28805656 E-mail: sales@self-ecg.com http://www.self-ecg.