Technical Specifications
2
VP
I.D.: 3", 4"
Lengths: 6", 1', 2', 3', 5'
VP PIPE & FITTINGS OVERLAP 1 1/2" WHEN JOINTED HENCE,
NET ASSEMBLED LENGTH IS 1 1/2" LESS THAN LISTED
LENGTHS (3' AND 5' LENGTHS AVAILABLE IN BLACK)
I.D.: 3", 4"
MAX. INSTALLED LENGTH 10 1/2"
ADJUST TO 8" SHORTER
(BLACK OR UNPAINTED)
VP-EZADJ
PELLET PIPE LENGTHS:
Vent Pipe & Adjustable Pipe Lengths
VP
VP-EZADJ
• Available in 3" and 4" diameters
• Full line of fittings and full range of pipe lengths
increase installation flexibility
• Proven coupling joint connects in seconds
to assure joint integrity
• Gasketed joint design
• Painted pipe lengths available for interior use
• Double wall design with 1/4” airspace
• Inner wall 304 stainless steel, outer wall
paintable galvanized
• Rolled-over male end eliminates
sharp edges
• 1" clearance to combustibles
• Removable tee cap for inspection and
cleaning
• Internal spacing bead assures uniform
insulating airspace between pipe walls
VP
Pellet Pipe
™
Selkirk
®
gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet burning stoves. Model VP
Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL
®
-641 Standard for Low
Temperature Venting Systems, as well as the applicable requirements from UL
®
-103 Standard for Residential Type and Building
Heating Appliance Chimneys. VP Pellet Pipe, when installed according to Selkirk’s
®
installation instructions, complies with
National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.
VP-TS
I.D.: 3" – A=9" B=4 1/2"
4" – A=10" B=5"
VP-TD
I.D.: 3" – A=9" B=4 1/2"
4" – A=10" B=5"
Tees & Double Tee w/ Tee Cap
VP-TS
4VP-3T
VP-TD
VP PELLET PIPE
™
PELLET PIPE TEES & ELBOWS:
4VP-3AT
Tee
• Used to transition from horizontal to vertical orientation
• Provides easy access for inspection and maintenance
• Includes Tee Cap
Double Tee
• Provides access to clean horizontal portion of chimney system
Pellet Pipe Lengths
• Available in lengths of 5’, 3’, 2’, 12” and 6”
• Available in galvanized and black
Adjustable Pipe Lengths
• Adjustable length eliminates the need to cut pipe
• Adjustable length simply slides over another VP length
4 x 3 Adjustable Tee w/ Tee Cap
TRUE
3
"
3 1/2
"
10
"
2 7/8"
1/4"
-
0"
+
1/8"
3 1/16
"
3 3/4"
5
"
• Replaces Pipe Connector, 3” – 4” Increaser and 4” Tee
3" Diameter 4" Diameter
Item Description Product No. Part No. Product No. Part No.
5' Length – Black 243060B 3VP-60B 244060B 4VP-60B
5' Length 243060 3VP-60 244060 4VP-60
3' Length – Black 243036B 3VP-36B 244036B 4VP-36B
3' Length 243036 3VP-36 244036 4VP-36
2' Length 243024 3VP-24 244024 4VP-24
12" Length 243012 3VP-12 244012 4VP-12
6" Length 243006 3VP-6 244006 4VP-6
12" EZ Adj. – Black 243086B 3VP-EZAJ12B 244086B 4VP-EZAJ12B
12" EZ Adj. 243086 3VP-EZAJ12 244086 4VP-EZAJ12
3" Diameter 4" Diameter
Item Description Product No. Part No. Product No. Part No.
Tee w/Tee Cap – Black
243100B 3VP-TSB 244100B 4VP-TSB
Tee w/Tee Cap 243100 3VP-TS 244100 4VP-TS
Double Tee w/Cap 243103 3VP-TD 244104 4VP-TD
Increaser Tee 244113 4VP-3T
Increaser Tee – Black 244113B 4VP-3TB
4" Diameter
Item Description Product No. Part No.
4 x 3 Adjustable Tee w/Tee Cap 244133B 4VP-3AT