Technical Specifications

ManualsBrandsSelkirk ManualsHeating & Cooling3" Ceiling Support Firestop Model VP Pellet Vent

VP Pellet Pipe

Selkirk

gives you the safe, efficient,

and cost-effective venting system that's

engineered precisely for pellet burning stoves.

• Available in 3" and 4" diameters

• 1" clearance to combustibles

• Gasketed joint design

• Inner wall stainless steel

• Outer wall available as galvanized or black

FEATURES

C A T A L O G

For pellet burning stoves.

Summary of content (8 pages)

PAGE 1
C ATA L O G VP Pellet Pipe For pellet burning stoves. Selkirk® gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet burning stoves.
PAGE 2
VP PELLET PIPE™ VP Pellet Pipe™ Selkirk® gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL®-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL®-103 Standard for Residential Type and Building Heating Appliance Chimneys.
PAGE 3
VP PELLET PIPE™ • Used to orient pipe between vertical and horizontal orientation • Factory sealed at couplers to prevent leakage 90˚ Elbow VP-90EL I.D.: 3" – A=5 13/16" 4" – A=6 7/16" (BLACK OR UNPAINTED) Item Description 3" Diameter Product No. Part No. 4" Diameter Product No. Part No.
PAGE 4
VP PELLET PIPE™ PELLET PIPE KITS: Pellet Pipe Insert (Flex) Kits 4" Pellet Pipe Flex Kit has the following: • 25' of 4" diameter stainless flex • 4" flex termination • 4" flex flashing adapter • 4" flex flashing • 3 - 4" Pellet Increaser • 3" Pellet Pipe Connector • Silicone sealant 4" Pellet Pipe Flex Kit has the following: • 35' of 4" diameter stainless flex • 4" flex termination • 4" flex flashing adapter • 4" flex flashing • 3 - 4" Pellet Increaser • 3" Pellet Pipe Connector • Silicone sealant Produc
PAGE 5
VP PELLET PIPE™ PELLET PIPE FLASHINGS: Tall Cone Flashing • Used to waterproof installations through a flat roof VP-TF Item Description 3" Diameter Product No. Part No. 4" Diameter Product No. Part No. Tall Cone Flashing 243815 244815 3VP-TF 4VP-TF I.D.: 3", 4" Adjustable Flashing • Used to waterproof installations that penetrate the roof line VP-AF (0-6/12) Item Description 3" Diameter Product No. Part No. 4" Diameter Product No. Part No. Adj. Flashing 243825 244825 3VP-AF 4VP-AF I.D.
PAGE 6
VP PELLET PIPE™ PELLET PIPE ACCESSORIES: 3" to 4" Increaser • Used to adapt 3” pipe to 4” pipe Item Description Product No. Part No. 3" to 4" Increaser 243304 3VP-I4 Pipe Connector Item Description 3" Diameter Product No. Part No. 4" Diameter Product No. Part No. Pipe Connector Pipe Connector – Black Multi-Fit Connector Adjustable Pipe Connector 243240 243240B 243241 243243 244240 4VP-PC 244243 4VP-APC 3VP-PC 3VP-PCB 3VP-MFC 3VP-APC I.D.
PAGE 7
VP PELLET PIPE™ MINIMUM CLEARANCE TO COMBUSTIBLES Selkirk® VP Pellet Pipe™ may be installed with a minimum 1" airspace clearance to combustible surfaces, such as framing lumber, drywall, plywood, or other building materials. VP Pellet Pipe™ may be exposed in occupied areas and painted pipe lengths help make your venting system an attractive accent to your interior decor.
PAGE 8
Selkirk Hearth Products Chimney: Ultra-Temp Ultra-Temp Large Galva-Temp Galva-Temp Large Venting: Direct-Temp/Gas Direct-Temp/Pellet Direct-Temp/Multi-Fuel Double Wall Stove Pipe Saf-T Pipe VP Pellet Pipe Flexi-Liner Versa-Liner Saf-T Liner MAX! Fireplaces: Bordeaux Merlot Chardonnay All Hearth Products Are Not Created Equal.