Aluminum Soffit & Fascia System Installation Guide Lifetime Warranty Baked-On Polyester Finish Maintenance-Free Provides Needed Intake Ventilation Protects & Beautifies Professional Quality Architectural Profile
S ell-Even’s corrosion resistant soffit panels control moisture and rotting problems common to eave and overhang areas, while also providing proper temperature balance and energy performance. Vented soffit panels resist the weathering of harsh winters while helping control ice dam buildup on roofing. In hot summer climates they help to control energy costs by lowering the interior attic temperature.
Fast & Easy Installation for New Constuction & Remodeling Soffit & Fascia Installation Tips Hip Roof (4-way overhang) Do NOT Over Nail Fascia Trim. Recommended: One Nail Every 36 in. Fascia Corners Cut bottom flange and bend 1” of end to make lap fold and form box at corner. Place next piece to overlap and continue installation. Fascia trim Fascia board Nail every 36 in. DO NOT drive nails tight! Double channel at corners Frieze runner location Align top of channel to bottom edge of fascia board.
Fast & Easy Installation for New Constuction & Remodeling Soffit & Fascia Installation Tips Do NOT Over Nail Fascia Trim. Recommended: One Nail Every 36 in. Gable End Roof Frieze Runner Channel Refer to Fig 1 for position detail. Fascia Trim Supply Co. Fascia Corners Refer to Fig 1 detail. Fascia board Soffit panels FIGURE 2 Using frieze runner channel:* (Refer to Figure 2) 1. FRIEZE RUNNER - Bottom edge of runner channel must be level and aligned with the bottom surface of the fascia board.
Aluminum Soffit Systems SOFFIT, 3-Panel, 12" Wide, SOFFIT, 4-Panel, 16" Wide, Solid Solid Vented - 2 panels Vented - 1 panel Colors:All SOFFIT 3-Panel Colors: All Length:12' SOFFIT 4-Panel No/Ctn: 17 Code Style A3SS12 A3VS12 Solid Vented -1 pnl. Net Free Area — 3.24 sq.in. 12” 3/8” Frieze Runner 1-1/4” Style A4SS16 A4VS16 Solid Vented -2 pnl. Net Free Area — 6.48 sq.in.
