Installation Instructions

8. SIDING UNDER WINDOWS
Fitting siding panels under windows usually requires
cutting a panel.
MEASURE SPACE UNDER WINDOW
Hold a piece of siding under the window. Measure and
mark on the siding the width of the opening under the
window. Lock a piece of scrap siding into the panel
below and hold it beside the window. Measure and
mark the vertical space on the panel, leaving 1/4"
space below the windowsill.
7
7. INSTALL BALANCE OF SIDING
After completing first row of siding, continue with
second row, starting each row at the back of the
house, working to the front. Stagger the lengths of
siding as you work so that the joint from the lower
panel does not line up nor is it near the panel above.
6. OVERLAP PANELS
Each panel should overlap previous panel 1/2" or half
the width of the factory notch to allow for movement in
the siding. Always lap the factory end over any end
you have cut. Lap all joints away from doors.