User's Manual

122
located to the left of the media buttons. Slide this switch to the right-most
position, "Media Mode", to control media playback.
If the "Play/Pause" button is pressed while you are using another program on
the BrailleSense, the unit opens the Media Player and begins playing the files in
the most recently played list. If there are no files in the playlist, the BrailleSense
says, "There are no items to display". "Back", "Stop", and "Forward" are
available after audio playback is started.
 Note: As the BrailleSense is able to multi-task, initiating audio playback
with the "Play/Pause" button does not close the program you were
running when you pressed it. To return to your former position, press "F2-
F3" to cycle through the running programs until you reach your former
location.
A playlist can contain only 1 file, or many files. If there is more than one file in
the playlist when you press the "Play/Pause" button, the BrailleSense plays all
the files in the list one after another. If you press the "Play/Pause" button during
playback, audio playback is paused. To resume playing, press the button again.
If you press the "Play/Pause" button while you are in the "Record" dialog, the
most recently recorded file is played.
If you press the "Forward" button, the next file in the playlist is played, and
pressing the "Back" button plays the previous file. If you press the "Forward"
button (while the last file in the list is playing, (or the "Back" button (while the first
file in the list is playing), it has no effect, as there is no file to navigate to.
You can use the "Record" button to create a recording using the internal
microphone or an external microphone from anywhere on the unit provided the
Media Mode switch is set to the right-most position. Pressing the "Record"
button once opens the "Record" dialog. Press the "Record" button again to start
recording. Press the "Record" button while you are recording to pause
recording. Resume recording by pressing the "Record" button one more time.