User's Manual

126
13) Stop: (S) "Backspace". Stops playback. You can also use the "Stop" button.
9.1.5 MAKING RECORDINGS
1) Record: (R) "Enter-R". Places you in standby mode. Press again to initiate
recording. Press "Space-Z" when finished. You can also use the "Record" button
to start recording and the "Stop" button to finish.
9.1.6 THE POSITION MENU
1) Mark Position: (M) "Enter-M". Marks the current position for later use.
2) Delete marked Position: (D) "Enter-D". Unmark the marked position.
3) Jump to Marked Position: (J) "Enter-J". Go to the position previously marked.
4) Go to Time: (G) "Enter-G". Go to a specific time in the file.
5) Go to Percent: (E) "Backspace-P". Move to a place in the file according to its
percentage.
6) Set Start Point: (L) "Enter-P". Set a start point for repeat play.
7) Release Point: (R) "Space-E". Set the end point for repeat playback.
9.1.7 THE MARK MENU
1) Set Mark: (S) "Backspace-M". Bookmark a specific point the media file.
2) Jump to Mark: (M) "Backspace-J". Move to a previously set mark.
3) Previous Mark: (P) "Backspace-dot-3". Moves back one mark from your
current position.
4) Next Mark: (N) "Backspace-dot-6". Moves to the next mark after your current
position.