User's Manual

128
9.2.1 LISTENING TO FM RADIO VIA THE INTERNAL SPEAKERS
When you execute the FM Radio after connecting headphones, sound from the
radio is directed through the headphones. As previously explained, it is
necessary to connect the headphones to provide an antenna for radio reception.
However, there may be times when you wish for the sound from the radio to
output through the speakers on the BrailleSense. To listen to the radio through
the internal speakers, press X, to toggle internal speaker output on/off.
You can adjust the radio volume using Space with the Up and Down scroll
buttons.
9.2.2 FREQUENCY CONTROL
To tune to another frequency, use the following commands:
Press "dot 5" to scan forward for the next radio station, and "dot 2", to auto scan
backward. Press "dot 6", to increase the frequency by0.1MHz, and "dot 3", to
decrease the frequency by0.1MHz. Press "Space-F" to input the frequency
directly. Type the frequency in numbers in the edit box and press "Enter".
You can also use the media buttons on the front panel to control the FM Radio.
The Media mode switch should be moved to the left-most position, "Application
Mode." Pressing the "Back" button scans backward, and pressing the "Forward"
button scans forward.
You can also activate frequency movement commands from the "Frequency"
menu.