User's Manual

129
9.2.3 ADDING AND NAVIGATING PRESETS
To add the currently selected frequency as a preset, select "Add Preset" from
the "Presets" menu, or press "Enter-S".
The "add preset" dialog is opened and "Frequency: (current frequency)" is
announced. "Tab" to the "Label" edit box. Type the name by which you want to
identify the preset. Press "Enter" to save the preset.
To add a frequency other than the one you're currently listening to, you may type
the number of the frequency you wish to add in the "Frequency" edit box of the
"add preset" dialog.
You can navigate your presets by using "dot 1" to move back, and "dot 4" to
move forward a preset.
To delete a preset, navigate to the preset and press "Space-D".
 Note: when this command is executed, the preset is deleted instantly
without any warning or verification.
You can also add and delete presets using the Preset Manager dialog. Select
"Preset Manager" from the "Presets" menu, or press "Enter-M".
The Preset Manager dialog contains the "Preset list", an "Add" button, a
"Delete" button, a "Modify" button and a "Close" button.
Pressing "Enter" on the "add" button opens the "add preset" dialog explained
above. The "Modify" dialog lets you change the label of the current preset in the
list. Use the "Delete" button to delete a preset from the preset list. To exit the
Preset Manager" dialog navigate to the "Close" button and press "Enter" or
press "Space-E".
You can also use the media buttons on the front panel to add and move among
presets. Press the "record" button for more than 2 seconds, to open the "add
preset" dialog. To move to the previous preset, press the "Back" button for more