User's Manual

When you format any disk on the BrailleSense, all information is erased.

Therefore, before you format, you are advised to backup any important data if

possible.

1) From the Utilities menu, press "Enter" on "Format" and "flashdisk" is focused.

Press "Enter", or choose another disk from the list, and press "Enter". *Note:

you can choose the format type between FAT32 and exFAT by pressing F3 from

the disk list.

2) You are prompted, "Format flashdisk?" Yes". Press "Enter"

3) You are prompted, "All data will be lost. Continue? Yes". Press "Enter".

4) The unit announces, "Now formatting flashdisk" and the format is started.

5) When the format is complete, you are returned to the "Disk" list.

To cancel the format, press "Space", or press "Enter" on "No" in step 2 or 3.

13.11 Set Sleep Timer

You can set the sleep timer to turn the BrailleSense off after a specified amount

of time regardless of what you are doing.

To set the Sleep Timer, navigate to "Sleep Timer" in the Utilities" menu and

press "Enter". Or press "Space-J" from anywhere on the unit.

You are prompted, "Sleep timer: 0". Enter the number of minutes for the sleep

timer in the edit box. The available settings range from 0 to 180. Press "Enter".

When the sleep timer is set, even if the device is active, it powers off after the

specified amount of time. If you set the sleep timer for "5" minutes and press

"Space-J (dots 2-4-5)" after 2 minutes, "3" is displayed in the edit box, indicating

the time remaining before the sleep timer powers the unit off.