User's Manual

48
The "Wireless LAN" dialog consists of the "access points" list, "Advanced"
button, "Options" button and "Close" button. You can move among these
controls by pressing "F3" or "Space-F3". If wireless is not turned on, the "access
points" list displays "no items".
When wireless is on, this list shows the wireless "access points" (networks) in
range of your notetaker. The "Access points" list displays the "access point
name", "encryption", and "sensitivity" of each item. (Ex: linksys, encryption:
WEP, sensitivity: good.) If there is more than one access point in the list, you
can move among them by pressing "Space-1" or "Space-4". Move to the
"access point" to which you want to connect, and press "Enter". If the access
point has no encryption, the BrailleSense announces, "Connecting to (access
point name)". If connection is successful, the connecting sound is heard. If the
network is encrypted and requires a network key, when you press "Enter" on the
access point, the "Network key" edit box is displayed. Type the network key in
computer Braille in the edit box and press "Enter". If your settings are correct,
the unit says, "Completed setting profile" and the connecting sound is heard.
The "Advanced" dialog is used to modify an existing profile, manually add a new
profile, or check the settings of an existing profile. Pressing "Enter" on the
"advanced" button, while wireless LAN is turned on, displays a list of the
wireless profiles saved on the BrailleSense.
The "Advanced" dialog has 5 controls: the "profile list", "Connect" button, "Add"
common dialog button, "Remove" button, "Properties" common dialog button,
and "Close" button. You can navigate among these controls by pressing "F3" or
"Space-F3". Navigate the items in the Profile list using "Space-1" and "space-4".
Press "Enter" to activate one of the buttons.
Use the "Add" button: to manually add a profile, specifically where an SSID is
hidden, and thus does not appear in the "access points" list. The "Add" dialog"
contains 10 controls.