User's Manual

50
1) If "Data encryption" has been set as "disabled", press "F3" and you are taken
directly to the "Confirm" button.
2) "Network key" and "Key index" is displayed only if you uncheck "The key is
provided automatically".
To delete a profile item in the profile list, select the profile item you wish to
delete, and press R or "Tab" to the "Remove" button and press "Enter".
To get information about a selected profile item in the profile list, "Tab" to the
"Properties" button and press "Enter". In the "Properties" dialog, you can
reconfirm or modify the information for each profile.
To exit the "Advance" dialog, press "Space-E" or "Space-Z".
The "Options" dialog allows you to set how the BrailleSense scans for and
detects wireless networks. The "Scanning Always Available" option allows you to
choose whether BrailleSense auto scans for available networks, even when you
don't open the Setup Internet dialog. The "Wi-Fi Frequency Band" determines
what Wi-Fi networks are detected and used. Choose from "Auto", "5GHz" and
"2.1GHz". Use "Space" to adjust the options in the dialog, and press "Enter" to
save your settings.
3.2.2 LAN SETUP
Before attempting to set up a LAN connection, connect one end of a LAN cable
to the BrailleSense via a USB to Ethernet adapter, and the other to a router or
direct LAN connection to the Internet. ?. From the list of connection options in
"Set up Internet", navigate to "LAN" and press "Enter".
"Setup IP: Automatic" is displayed. If your service provider does not require you
to use a static IP address, simply press "Enter" on this option for automatic
setup. For the automatic setup, your host server should provide DHCP service
(Dynamic Host Configuration Protocol).