User's Manual

3.3.1 BLUETOOTH DEVICE LIST

When the Bluetooth Manager is activated, you are placed in a dialog with 2

items: a paired devices list, and a "Search" button to scan for available devices.

For example, if you have a computer with Bluetooth enabled nearby, the

BrailleSense attempts to find it. It may take 30 to 40 seconds to discover all of

the Bluetooth devices in range. The BrailleSense announces and displays,

"Scanning for devices. Please wait...” Full cells are filled in on the Braille display

to indicate scanning progress.

When a Bluetooth device is detected, the BrailleSense announces "found

(Bluetooth device name)".

 Note: while the BrailleSense is scanning for Bluetooth devices, it cannot

respond to key presses. In addition, you may not cancel the scan once it

has begun, but must wait for its completion before the BrailleSense

returns to normal operation.

When the scanning process completes, you are placed in the Bluetooth Device

List. If the BrailleSense has found other Bluetooth devices in range, they are

displayed as "device name (untrusted (or trusted)) xx/yy" where xx is the

number at which the device appears in the list, and yy is the total number of

devices. "Trusted" indicates that the service has been authenticated, "untrusted"

indicates the service has not been authenticated.

If there are no other Bluetooth devices in range, the BrailleSense announces,

"no items". You can press "Space-1" or "Space-4" to move through the list. To

select a device from the list, press "Enter" on the device name.

If the Bluetooth device is trusted, settings for connecting the device are

automatically saved in the BrailleSense. If you want to delete this information,

press "Space-D" on the Bluetooth device name in the list. The BrailleSense