User's Manual

99
8) Press "F3" to move to "SMTP username". If your Internet account provider
requires you to use a different SMTP username, enter it in this edit box.
9) Press "F3" to move to "SMTP password". Type the password that
corresponds to the above ID (using computer Braille if entering US Braille). If
your SMTP username and password are not different, leave these items blank.
10) Press "F3" to move to "Use as default send-from account" To use the
username and password that were set in steps 7 and 8, select the check box by
pressing "Space".
11) Press "F3", move to "Use signature". The default value is "No". To attach a
signature to your mail, press "Space" to change "No" to "Yes".
12) If you chose yes, press "F3", to move to "Signature" and press "Enter".
13) You are placed in the "Signature:" multi edit box. Type the information for the
signature you want to attach to your e-mails.
14) Tab to "Confirm" and press "Enter".
15) Tab to the "Confirm" button and press "Enter" to save the settings in the
"Advanced" dialog.
16) Tab to the "Confirm" button one more time to save the settings in the main
"Account information" dialog.
7.3 Managing Accounts
To view the information about a stored e-mail account, open the "Accounts
Manager" as described previously. Navigate to the account for which you want
information and press "Enter" or Tab to "Information" and press "Enter".