SMH10R Low Profile Motorcycle Bluetooth® Headset & Intercom www.SenaBluetooth.
SMH10R © 1998-2013 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena.
SMH10R 1. 2. 3. 4. English CONTENTS INTRODUCTION……………………………………………………………………………………………… PACKAGE CONTENTS……………………………………………………………………………………… INSTALLING THE SMH10R ON YOUR HELMET………………………………………………………… POWERING ON/OFF AND CHARGING…………………………………………………………………… 4 5 6 8 12. M OBILE PHONE CALL MAKING AND ANSWERING………………………………………………… 24 5. VOLUME ADJUSTMENT…………………………………………………………………………………… 10 6. SMH10R CONFIGURATION SETTING… … ……………………………………………………………… 10 14.
SMH10R 1. INTRODUCTION Thank you for choosing the Sena SMH10R, Low Profile Bluetooth Stereo Headset and Intercom. With the SMH10R, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions from your GPS navigation system by wireless Bluetooth, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SMH10R is compliant with Bluetooth 3.
SMH10R • Speakers • Headset Main Unit • Attachable Boom Microphone (+) Button / (-) Button Speaker Connector Microphone Connector Battery Pack Connector English 2.
SMH10R • Velcro Pads for Main Unit • Double Sided Adhesive Tapes for Main Unit • Microphone Sponges 3. INSTALLING THE SMH10R ON YOUR HELMET To securely install the main unit of the SMH10R, you can use the velcro pad or double sided adhesive tape. Please follow the procedure below. 1. Peel off the cover of the adhesive tape of the velcro pad and attach it on the back plate of the main unit.
SMH10R 4. Attach the main unit to the velcro pad of your helmet. In the case of the wired microphone, attach the velcro pad for the wired microphone to the inside of the chin guard for full-face helmets. Place the wired microphone on the velcro pad and attach the microphone connector to the 2 pin connector of the main unit cable. 6. There are two types of microphone that can be installed in your helmet.
SMH10R 7. Attach the velcro pads to the battery pack in the same manner as the main unit and place the battery on the back side of your helmet. Attach the battery connector to the 2 pin connector of the main unit cable. 4. POWERING ON/OFF AND CHARGING 4.1 Powering On Press the Center Button and the (+) Button at the same time for 1 second to power on. The blue LED turns on and you will hear ascending beeps and “Hello”. 4.
SMH10R 4.4 Low Battery Warning When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps and a voice prompt, “Low battery”. 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. You can use the 2-Pin Connector to Micro-USB Adaptor for charging the SMH10R with the battery pack.
SMH10R 5. VOLUME ADJUSTMENT You can easily adjust the volume by tapping the (+) Button or the (-) Button. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn the headset off and on. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music.
SMH10R Phone pairing Multipoint pairing Exit configuration Factory reset Phone selective pairing Delete all pairings Voice prompt Media Selective pairing Speed Dial VOX sensitivity VOX phone 6.
SMH10R 6.3 Phone Selective Pairing 6.5 Assigning Speed Dial Voice Prompt “Phone selective pairing” Voice Prompt “Speed dial” Factory Default N/A Factory Default N/A Execute Tap the Center Button To go into phone selective pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Phone selective pairing”. Please refer to section 8 for more details on phone selective pairing. If you tap the (+) Button or the (-) Button, you can exit from the phone selective pairing mode.
SMH10R 6.7 Enabling/Disabling Voice Activated Intercom Note: 6.6 Enabling/Disabling Voice Activated Phone Answering Voice Prompt “VOX phone” Factory Default Enable Enable / Disable Tap the Center Button Tap the (+) Button or the (-) Button until you hear the voice prompt, “VOX phone”. If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough, unless you are connected to intercom.
SMH10R Level 5 is the highest sensitivity setting and 1 the lowest. After you have completed the setting, tap the Center Button to apply the changes. 6.9 Enabling/Disabling Voice Prompts Voice Prompt “Voice prompt” Factory Default Enable Enable / Disable Tap the Center Button You can disable voice prompts by configuration setting, but the following voice prompts are always on.
SMH10R Tap Center Button Phone Pairing None Multipoint Pairing None Phone Selective Pairing None Media Selective Pairing None Speed Dial Execute VOX Phone Enable / disable VOX Intercom Enable / disable VOX Sensitivity - Set up 1 /2 / 3 / 4 / 5 or cancel - Enter adjustment mode - Save and exit Voice prompt Enable / disable Delete All Pairings Execute Factory Reset Execute Exit Configuration Execute 7.
SMH10R 7.1 Mobile Phone Pairing 1. To enter the voice configuration menu, press and hold the Center Button for 10 seconds until you hear the voice prompt, “Configuration menu”. 2. By tapping the (+) Button, you will hear the voice prompt, “Phone pairing”. 3. Search for a Bluetooth device on your mobile phone. Select Sena SMH10R in the list of devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for a PIN. 5.
SMH10R If you have a stand alone Bluetooth stereo device, follow the pairing procedure separately. The procedure is the same as the procedure given in “7.1 Mobile Phone Pairing”. Note: 1. I f a Bluetooth connection between the headset and a mobile phone is disconnected, press the Center Button for 3 seconds until you hear a high tone single beep to recover the Bluetooth connection immediately. 2.
SMH10R 5. The GPS confirms that pairing has completed and the SMH10R is ready to use. You will hear the voice prompt, “Your headset is paired”. 6. If the pairing process is not completed within three minutes, the SMH10R will return to stand-by mode. The pairing diagram for multipoint GPS pairing is shown in the figure below. 7.4.
SMH10R Note: 7.5 P airing with the Sena SR10 Bluetooth Two-way Radio Adapter The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SMH10R with an SR10 by multipoint pairing, the SMH10R is able to have two HFP devices at the same time: a mobile phone and the Sena SR10. 1.
SMH10R 8. PAIRING WITH SELECTIVE PROFILE: HFP OR A2DP STEREO Smart Phone If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SMH10R for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SMH10R to their smartphones with only one selective profile: A2DP stereo for music or HFP for phone call.
SMH10R 8.2 Media Selective Pairing: A2DP Stereo Music Only 1. To enter the voice configuration menu, press and hold the Center Button for 10 seconds until you hear the voice prompt, “Configuration menu”. 2. Tap the (+) Button four times and you will hear the voice prompt, “Media selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SMH10R in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some smartphones may not ask for a PIN. 9.
SMH10R 5. The intercom pairing queue is “Last-Come, First-Served”. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as the “first intercom friend”. The previous intercom friend becomes the “second intercom friend”, and “third intercom friend”. A B D Note: C For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A.
SMH10R The SMH10R operates in the following order of priority: (highest) Mobile phone, I ntercom, Music sharing by Bluetooth stereo music, (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by an intercom call, and intercom conversation is interrupted by an incoming mobile phone call. 11. STEREO MUSIC English 10. FUNCTION PRIORITY You can listen to stereo music from your Bluetooth wireless audio device.
SMH10R 2. To play or pause music, press the Center Button for 1 second until you hear a mid-tone double beep. 3. To track forward or track back, press the (+) Button or the (-) Button for 1 second until you hear a mid-tone single beep. You can stop music streaming while you are listening to the music by pressing the (-) Button for 4 seconds until you hear high tone double beeps. 24 12. MOBILE PHONE CALL MAKING AND ANSWERING 12.1 Mobile Phone Call Making and Answering 1.
SMH10R 12.2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu. 1. To enter into the voice speed dial menu, press and hold the (+) Button for 3 seconds and you will hear a mid-tone single beep and a voice prompt saying “Speed dial”. 2. Tap the (+) Button or the (-) Button to navigate between the menus. You will hear voice prompts for each menu item. 3.
SMH10R Answer Tap the Center Button or Say “Hello” End Press the Center Button for 2" Reject Press the Center Button for 2" Call Speed Dial Voice Command Use phone keypad Press the (+) Button for 3" Press the Center Button for 3" Mobile Phone Call Button Operations 13. TWO-WAY INTERCOM 13.1 Start and End Two-way Intercom 1.
SMH10R Terminate End Two-way Intercom Conversation Start intercom End intercom 1st intercom friend 2nd intercom friend 3rd intercom friend Single tap Double tap Triple tap Single tap Start & End Two-way Intercom 13.2 Voice Activated Intercom (VOX Intercom) If VOX Intercom is enabled by the configuration setting as described in section 6.6, you can initiate an intercom conversation with the last connected intercom friend by speaking any word loudly.
SMH10R prompt, “Intercom requested”. In this case, the intercom call does not override the mobile phone call because intercom has a lower priority than a mobile call. You have to hang up the mobile phone call to make or receive an intercom call. 13.4 Intercom and GPS If you pair a Bluetooth GPS to the SMH10R as described in 7.4 of this user's guide, you can hear the turn-by-turn voice instructions of the GPS while having an intercom conversation.
SMH10R Smart Phone HFP + Mobile Phone Pairing A2DP Two-way Radio Wired Connection Audio from Two-way Radio Sena SR10 SMH10R Multipoint Pairing Wired Connection Wired Connection Intercom Intercom Pairing GPS English 14. THREE-WAY CONFERENCE INTERCOM 14.1 Start Three-way Intercom You (A) can have a three-way conference intercom with two other SMH10R friends (B & C) by establishing two intercom connections at the same time.
SMH10R 1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. First Friend (B) (A) g (A) rin rin g i Pa Pa i 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A). Second Friend (C) 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with intercom friend (B). Or intercom friend (B) may start an intercom call with you (A).
SMH10R Center Button 15. FOUR-WAY CONFERENCE INTERCOM 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SMH10R users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C).
SMH10R 15.2 End Four-way Intercom As in the case of three-way intercom, you can completely exit from the four-way conference intercom or just disconnect a single intercom connection. 1. Press the Center Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2. Tap or double tap the Center Button to disconnect the intercom connection with one of the two intercom friends accordingly.
SMH10R You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. While having a mobile phone call, make an intercom call to one of your intercom friends (B, C or D) by tapping the Center Button once, twice or three times to form a three-way conference call with the person on the mobile phone line. To disconnect the intercom first and go back to your private mobile phone call, terminate the intercom by tapping the Center Button once.
SMH10R 20. FAULT RESET When the SMH10R is not working properly or is faulty for any reason, you may reset it by pushing the pin-hole reset button at the front of the headset main unit. Insert a paper clip into the reset pinhole and press the reset button for a second using light pressure. The SMH10R will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to the factory default settings. 34 21.
SMH10R English 22.
SMH10R Case 2 Case 3 GPS - Mobile Phone Pairing Bluetooth GPS* Bluetooth GPS* Mobile Phone Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Bluetooth Pairing Procedure GPS - Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Bluetooth GPS* zumo 550/660/665, TomTom Rider Usage • GPS zumo 660/665: GPS instruction, phone call, listening to music zumo 550, TomTom Rider: GPS instruction, phone call • Intercom 36 Intercom Pairing Multipoint Pairing Mobile Phone Bluetooth Pairing Proce
SMH10R Case 4 Case 5 English Mobile Phone Mobile Phone Mobile Phone Pairing Mobile Phone Pairing GPS Intercom Pairing Mobile Phone Pairing Bluetooth GPS* Intercom Pairing Mobile Phone Pairing Motorcycle Bluetooth Audio System* Music Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Bluetooth GPS* Yupiteru, smartphone apps Usage • Mobile Phone: phone call • GPS: GPS instruction • Intercom Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing I
SMH10R Case 6 Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Multipoint Pairing Intercom Pairing Mobile Phone Mobile Phone Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Motorcycle Bluetooth Audio System* BMW R1200RT, K1600GT, K1600GTL Intercom Pairing Mobile Phone Pairing Motorcycle Bluetooth Audio System* Multipoint Pairing Bluetooth GPS* 38 Music Usage • Mobile Phone: phone call • Motorcycle Bluetooth Audio System: listening to music • GPS: GPS instruction •
SMH10R Case 7 English Bluetooth Pairing Procedure Mobile Phone Pairing Multipoint Pairing Intercom Pairing Mobile Phone GPS Mobile Phone Pairing Usage • Mobile Phone: phone call • SR10: two-way radio, GPS guidance, Radar detecting signal • Intercom SR10 Multipoint Pairing Two-way Radio Intercom Pairing Radar Detector 39
SMH10R Case 8 Mobile Phone GPS Mobile Phone Pairing Mobile Phone Pairing Bluetooth GPS* Mobile Phone Pairing MP3 Player Intercom Pairing Bluetooth Pairing Procedure GPS - Mobile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Usage • GPS: phone call, GPS instruction • MP3 Player: listening to music • Intercom 40
SMH10R Case 9 Mobile Phone Mobile Phone Pairing GPS SM10 SR10 Multipoint Pairing Mobile Phone Pairing English Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing Multipoint Pairing Intercom Pairing Usage • Mobile Phone: phone call • SR10: two-way radio, GPS instruction, Radar detecting signal • SM10: listening to music/sharing • Intercom Two-way Radio Intercom Pairing Mobile Phone Pairing Radar Detector 41
SMH10R Case 10 Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing Multipoint Pairing Intercom Pairing Mobile Phone Mobile Phone Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Multipoint Pairing Intercom Pairing Mobile Phone Pairing SM10 Mobile Phone Pairing OR Motorcycle Audio System 42 MP3 Player Bluetooth GPS* Usage • Mobile Phone: phone call • GPS: GPS instruction • SM10: listening to music/sharing • Intercom
SMH10R Type Description Mobile Phone Duration LED Type Description Button Center Button 5 sec LED Red flashing Beep Mid-tone single beep Center Button & (+) Button Tapping Tapping - - (+) Button or (-) Button Tapping - - Start/end intercom conversation Center Button Volume adjustment 1 sec Center Button Tapping - - End conference intercom Center Button Answer phone call Blue flashing Mid-tone single beep (+) Button 3 sec - Mid-tone single beep Play/pause Bluetooth music
SMH10R BATTERY INFORMATION MAINTENANCE AND CARE The SMH10R has an external, rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. The SHM10R should be treated with care and the following suggestions will help you protect your warranty coverage. 1.
SMH10R CERTIFICATION AND SAFETY APPROVALS The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection points at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
SMH10R • Increase the separation between the equipment and receiver. •C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
SMH10R By using the SMH10R you waive all substantial legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all the terms of this agreement, you should immediately return the product for a full refund. By using the headset you agree to be bound to this agreement and forfeit the right to sue.
SMH10R respect of any person or property however caused, WHETHER ARISING FROM NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you at some future date as a result of the said use, to the fullest extent permitted by law. 2. You fully understand and assume the risks in using the Device, including the risk of negligent acts or omissions by others. 3.
SMH10R Limitation of Liability EXCEPT AS EXPRESSLY PROVIDED HEREIN, SENA MAKES NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO ANY EQUIPMENT, PARTS OR SERVICES PROVIDED PURSUANT TO THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SMH10R WARNING Sena informs you that using this device in public traffic may not be authorized by the law. Please check your local laws and do not use this device in public traffic, but only on private property or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. Sena denies any liability should you choose not to respect this warning.
1.2.0 www.SenaBluetooth.com User's Guide for Firmware v4.