User's Manual

50 ProBee-ZE20S Series User Guide Rev.0.1
7.2.4 ATE
Description Echo(1) or No Echo(0).
Execute ATE<number><CR>
Response OK<CR>
7.2.5 ATM
Description
Enter the multicast mode. If there’s no argument after the command, it will connect to
the preconfigured destination group ID. Every data is packetized at intervals of inter
character timeout(S12).
Execute ATM<CR> ATM<groupID><CR>
Response OK<CR>
7.2.6 ATO
Description Return to data mode.
Execute ATO<CR>
Response
7.2.7 ATR
Description Response(1) or No Response(0).
Execute ATR<number><CR>
Response OK<CR>
7.2.8 ATS
Description Get/Set the S-registers.
Execute ATS<CR> ATS<number>?<CR> ATS<number>=<value><CR>
Response
List of the S-register and
description
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
7.2.9 ATZ
Description Reset the node.
Execute ATZ<CR>
Response OK<CR>
7.2.10 AT&F
Description Factory reset.
Execute AT&F<CR>
Response OK<CR>